Compact Form
Big Possibilities

Clean-Ride proves that big ideas don’t need much space — just smart design. When every litre of water and every centimetre counts, making the most of them became our priority.

Efficient

Water heats up to 40°C in around 40 minutes. Just 7 litres of water is enough for a 4-minute hot shower.

Compact

The entire shower system packs into a 63 × 38 × 19 cm travel case, with a convenient handle for easy transport.

Spacious

Comfortably spacious inside: 190 cm high, 94 × 70 cm across the upper section, with a 58 × 33 cm shower tray.
FAQ

Wondering How Clean‑Ride Works?
Let Us Explain!

How does Clean-Ride work?

It’s really simple! Fill the tank with 7 litres of water, connect Clean-Ride to a 24 V power outlet (min. 10 A) and use thethermostat dial to set your preferred temperature: up to 40°C. When the water reaches the selected temperature (after approximately 40 minutes), a green indicator light lets you know it’s ready. The water can also be heated with the engine switched off.

Place Clean-Ride between the seats and inflate the shower enclosure in just a few seconds using a pneumatic air gun available in every truck. And that’s it: you’re ready to enjoy a private hot shower. While you shower, the used water automatically flows into the built-in grey-water tank, keeping it contained within the system.

After use, leave the enclosure open to dry, deflate it and fold it into the case. Then simply empty the grey-water tank in the nearest toilet.

Will Clean-Ride fit my truck?

Clean-Ride is a universal solution and is not limited to any particular truck brand or model. The shower enclosure is 205 cm high, but its flexible construction allows it to adapt to lower cabins and the space available inside them. This means Clean-Ride fits all trucks with a minimum cabin height of 190 cm.

How much shower time do I get?

7 litres of water provides approximately 3 - 5 minutes of , depending on the selected water flow. You can adjust the flow directly on the shower head to suit your preference. The maximum water temperature is 40°C, while most people find 36 – 38°C the most comfortable range for a shower.

How easy is Clean-Ride to set up and pack away?

Thanks to its inflatable design, the shower enclosure takes just a few seconds to set up: simply inflate it using a pneumatic air gun available in every truck. After use, leave the enclosure open to dry, deflate it and fold it back into the case.

Where does the used water go?

While you shower, the used water automatically flows into a separate grey-water tank, keeping it contained within the system. Once you’re finished, simply pack Clean-Ride away and take it to the nearest toilet, where you can empty the tank. Thanks to the case’s wheels and convenient transport handle, transport of Clean-Ride is easy even with water inside.

Can water spill during use or transport?

No. Clean-Ride is designed to keep water safely contained within the system, both during use and transport. Three specially designed plugs prevent water from escaping: one for the clean-water tank, one for the grey-water tank and one for the shower tray drain.

Does Clean-Ride need to dry before being packed away?

Yes. After use, leave the shower enclosure open to dry. We developed a special quick-drying material specifically for Clean-Ride, allowing it to dry in approximately one hour. You can significantly reduce the drying time by using the truck’s ventilation or heating system to direct air towards the open enclosure.

Can Clean-Ride be used outside the truck cabin?

Clean-Ride was designed primarily for use inside the truck cabin, giving you the privacy of your own shower without having to leave the vehicle. However, it can also be set up outside, next to the truck. In this case, you simply need an extension cable to connect Clean-Ride to the truck’s 24 V power supply.

How do I store Clean-Ride?

When packed away, the entire Clean-Ride system fits into a compact case that can be conveniently stored in the truck’s luggage compartment, without taking up valuable space inside the cabin. When it’s time for a shower, simply bring Clean-Ride into the cabin to heat the water and prepare the system for use.

Can Clean-Ride be used in winter?

Yes, Clean-Ride is designed for year-round use and can also be used in winter. However, when temperatures fall below 0°C, the system must be completely drained before storage to prevent the water inside from freezing.

When will Clean-Ride be available for sale?

Clean-Ride will officially go on sale in January 2027. However, you can already place a pre-order and reserve your unit to be among the first to receive Clean-Ride. Clean-Ride is priced at €529 net. To place a pre-order, simply complete the pre-order form and pay a 20% deposit to confirm your reservation.

To celebrate IAA Transportation 2026, we’re offering a special €100 discount on every unit pre-ordered by 20 September 2026. The number of units available at the promotional price is limited. Simply submit your pre-order form by 20 September to secure the €100 discount: it’s the submission date that counts, even if we confirm your order later.

BE THE FIRST TO KNOW

A New Kind of Freedom
is on the Way

Clean-Ride Shower hits the road in January 2027. Leave your email and we’ll let you know as soon as it’s available.

Check your inbox and confirm your email address.
Oops! Something went wrong. Please try again.
CONTACT US

Drive Change Together

Clean-Ride is made for life on the road — and for the people and businesses that keep it moving. We’re always happy to talk about the product, its possibilities and what comes next. If you’d like to bring Clean‑Ride on board across your fleet, discuss a larger order or simply learn more about our product, we’re here to help.

Email

Phone